Hello, welcome Xuyang Chemical

Electrically heated stainless steel reaction tank

Heat conduction oil is placed in the jacket of the electrically heated stainless steel reaction tank, which is heated by an electric heating rod. There are connection holes for inlet, discharge, overflow measurement, discharge, electric heating rod and temperature measurement on the jacket. The stainless steel reaction kettle heated by steam is directly filled with steam heating in the jacket. The steam heating reaction kettle needs a stable steam heat source supply, and is usually equipped with a boiler.

24 Hours Tel:+8618921733114

Detailed Introduction

Heat conduction oil is placed in the jacket of the electrically heated stainless steel reaction tank, which is heated by an electric heating rod. There are connection holes for inlet, discharge, overflow measurement, discharge, electric heating rod and temperature measurement on the jacket.
The stainless steel reaction kettle heated by steam is directly filled with steam heating in the jacket. The steam heating reaction kettle needs a stable steam heat source supply, and is usually equipped with a boiler.

Scope of application of reaction kettle:
I. stainless steel reaction kettle is widely used in reaction, evaporation, synthesis, polymerization, saponification, sulfonation, chlorination and nitrification in chemical industry, food, coating, hot melt adhesive, silica gel, paint, medicine and petrochemical production.
Ii. Introduction to stainless steel reaction kettle:
Stainless steel reaction kettle also known as stainless steel reaction tank.
It is composed of kettle body, kettle cover, agitator, heating and cooling jacket, support and transmission device, shaft sealing device, oil spill tank, etc., and equipped with electric heating rod, temperature measuring and pressure measuring meter, etc.
Due to the user due to the production process, operating conditions are not the same, the stainless steel reaction kettle mixing generally have anchor type, pulp type, turbine type, advance type or frame type.
Jacket outer wall welding support, support has two kinds of suspension or support, the lower part of the pot has a feeding hole.
Heat conduction oil is placed in the jacket of the electrically heated stainless steel reaction kettle and heated by an electric heating rod. There are connection holes for inlet, discharge, overflow measurement, discharge, electric heating rod and temperature measurement on the jacket.
The stainless steel reaction kettle heated by steam is directly filled with steam heating in the jacket. The steam heating reaction kettle needs a stable steam heat source supply, and is usually equipped with a boiler.
Iii. Characteristics of stainless steel reaction kettle:
1, stainless steel material has excellent mechanical properties, can withstand higher working pressure, but also can withstand the impact of bulk solid material feeding.
2, good heat resistance, operating temperature range is very wide (-196~600℃).
It does not peel at higher temperature, so it can be used for direct fire heating.
3, has a good corrosion resistance, no rust phenomenon.
4. Better heat transfer effect than enamel reaction kettle, faster temperature rise and temperature drop.
5, good processing performance, according to the process requirements, can be made into a variety of different shapes and structures of the reaction kettle.
The wall can be polished and polished, so that it does not hang material, easy to clean.
Comprehensive comparison: electric heating stainless steel reaction kettle because of the large power of the electric heating rod, energy consumption than the steam heating reaction kettle, the heating speed is also slower than the steam heating reaction kettle;
However, the steam heated stainless steel reactor needs to be equipped with coal-fired boiler, and the basic investment is slightly larger than that of electric heating reactor.

Recommended

Technical support: