Hello, welcome Xuyang Chemical

electric heating reactor

The main type of electric heating reactor, there is stainless steel electric heating reaction kettle, non-standard electric heating reactor, etc. With rapid heating, high temperature, corrosion resistance, hygiene, no environmental pollution, no boiler is automatically warming, easy to use.

24 Hours Tel:+8618921733114

Detailed Introduction

The electric heating reactor made by Jiangsu Xuyang Chemical has the characteristics of rapid heating, high temperature resistance, corrosion resistance, sanitation, no environmental pollution, automatic heating without boiler, and convenient use. Use an electric heating rod to heat the heat-conducting oil inside the jacket to raise the temperature of the heat-conducting oil to the required temperature, and then a temperature measuring controller controls the electric heating rod to keep it at a constant temperature.


Application:

It is widely applied for producing pharmaceuticals, construction materials, chemicals, foodstuffs, pigments and etc.

 

Our company produces electricity reactor is composed of upper and lower head, inner cylinder, jacket (inner tube, outer tube, mixer, semi) seal, stirring transmission device and supporting etc, according to the production process and operating conditions, the jacket heating type divided into electric bar heating, steam heating, heating oil, seal device for packing seal and mechanical seal, mixing type anchor, slurry type, turbine type, push type and frame type etc.

The number of holes, specifications, other requirements can be designed and manufactured according to user requirements, the material is stainless steel 304, 321, 316L, dual phase steel, 2205, alloy steel, etc.

 electric heating reactor

Technical Parameter

Model

 

Norminal Capacity

(L)

Heating Power (KW*PCS)

Inner diameter

(mm)

Outer diameter (mm)

Motor power (KW)

Stirring rate

(r/min)

Weight (KG)

50L

50L

2*4

Φ400

Φ550

0.8

 

80

 

270

100L

100L

2*6

Φ500

Φ650

1.1

 

80

 

340

300L

300L

4*6

Φ800

Φ950

2.2

 

80

 

700

500L

500L

4*9

Φ900

Φ1050

3

 

80

 

930

1000L

1000L

4*12

Φ1200

Φ1350

4

 

80

 

1610

2000L

2000L

5*15

Φ1400

Φ1550

4

 

80

 

2010

3000L

3000L

6*15

Φ1600

Φ1750

5.5

 

80

 

2590


discuss the control strategies when the temperature inside the reactor gets too hot

If the stainless steel reactor produces too high, with cooling water. The temperature after water cooling should be based on the process. If an overvoltage is generated, the automatic exhaust valve is turned on immediately. Emergency pressure is alleviated.

If it is stopped, the parking should be stopped; if the power supply is turned on, it should stop the electric exhaust valve and cool the circulating water. For long-term parking, the residual liquid in the kettle should be cleaned, and the bottom valve, water supply valve, water valve, drainage valve, etc. should be turned off.

Because some chemical media have mobile risks, stainless steel reactor manufacturers stipulate that customers protect their equipment in a variety of conditions. We must perform usual maintenance, properly handled exception, avoid use.

No.1 Yongyi Road, Chengnan Industrial Zone, Jingjiang City, Jiangsu Province, China
+86 152 9543 7509(Dolly)
+86 133 3889 4168
+86-523-84622280
dollyjiang@jiangsuxuyang.com ; sangyunlong228@126.com
www.jsxuyang.net

Recommended

Technical support: