Hello, welcome Xuyang Chemical

Introduction to corrosion of stainless steel reaction tank

Clicks495Time:2020-10-14
Introduction to corrosion of stainless steel reaction tank
1. External corrosion of stainless steel reaction tank. The kettle equipment is composed of a heating layer and an external iron tire. The medium of iron is not resistant to acids and alkalis. If the reactor cover or pipe joint is not tightened or the gasket fails during our production process, acid will leak out and corrode the iron tires on the outer layer of the electric heating reactor equipment.
reactor
2. Corrosion of stainless steel reaction tank supports. During installation, the support or other supporting parts are sometimes directly installed on the floor. When the electric heating reactor is installed, the corrosion medium may be deposited on the floor due to the long-term production operation, so that the electric heating reactor equipment Corrosion of the supporting parts causes changes in the supporting force of each supporting part, which leads to changes in internal stress and damage to the heating layer during the production process.

3. The stress of the nozzle of the stainless steel reaction tank is on the electric heating reactor. When the steel pipe is connected to the nozzle, the thermal deformation of the electric heating reactor vessel and the stress caused by the heating or cold of the pipeline will damage the pipeline.

Recommended reading

Polishing process of stainless steel reactorExplain the traditional heating method of stainless steel reactorHow to check whether the seal of the stainless steel reactor is leaking The use of reactor in daily life250ml stainless steel reactorApplication of stainless steel mixing equipment
Technical support: